3mm - 19mm Safety Indoor Flat Float Glass Curve Tempered With 3C / CE
1) Thickness: 3mm to 19mm
2) Max size: 2440 x 3660mm
3) Curve or Flat
Tempered glass is a type of glass that has increased strength on the surface by the physical or chemical treatment on the ordinary glass and increased the tensile stress inside the glass so that this kind of glass has increased the mechanical strength and the heat-resistant impact strength, so collectively called tempered glass which can also be classified into full tempered glass and half full tempered glass (also called HOT-REINFORCED GLASS) in terms of the different treatment degrees.
SINOY Flat/Bent TEMPERED GLASS is made by heating flat glass to just below its softening temperature (650 °c) and suddenly chilling it with jets of cold air. It results in the outer skins under powerful compressive stress and the interior with severe tensile stress. In consequence, the impact applied to the glass will be overcome by the compressive stress on the surfaces to assure safety of use. It is ideal for areas with high wind loads and areas where human contacts are an important consideration.
1. 4-5 times harder than ordinary float glass, stronger resistance to thermal breakage than annealed or heat strengthened glass.
2. Once breakage occurs, the glass disintegrates into small cubical fragments, which are relatively harmless to human body.
3. It withstands abrupt temperature change of 220 Centigrade.
4. Sizes are produced as per customer request, once tempered, it can not be cut again.
China GB15763.2-2005 and 9963-1998;
Europe EN 12600: 2002, 16 CFR 1201;
America ASTM C1048;
UK BS 6206: 1995
2. Frameless facades
5. Frameless doors
6. Shower enclosures
7. Table tops and furniture
8. Fireplace enclosures
Flat or Curve
Clear, Extra Clear, Green, Blue, Green, Bronze, etc.